Can the Fuelpak 3 Read the Bcm Module

Vance & Hines Fuelpak FP3

Fuelpak FP3

The Fuelpak FP3 is the best-selling ECU tuner in the globe for Harley-Davidson motorcycles because it is the well-nigh intuitive tool on the marketplace, giving you the power to control every attribute of your motorcycle's tune, view live sensor data, calibrate your speedometer, read and clear trouble codes, utilize a alive sensor data brandish, and offers best in industry back up from our FP3 technicians, all from your smartphone. The Fuelpak FP3 besides backs upward your OEM calibration and gives you access to Vance & Hines' library of thousands of dyno-tuned maps, made by our trained dyno technicians and designed for whatsoever combination of performance exhausts and air cleaner components.

Vance & Hines Fuelpak FP3 for Android

Everything you need, right on your phone

Download the intuitive Fuelpak FP3 app to your compatible iOS or Android device and wield the power to tune your cycle right in your pocket

download fuelpak from app storedownload fuelpak from google play store

Vast library of Dyno tuned maps

Vast library of
Dyno Tuned Maps

Cull from an expansive drove of maps dyno tuned in-house by Vance & Hines, calibrated for your specific combination of motorcycle and operation parts. Virtually all combinations of Vance & Hines exhaust are available, equally well as those from other exhaust manufacturers.

Monitor your ride

Continue an center on your motorbike'due south vitals right in the Fuelpak FP3 app. The ability to read and diagnose trouble codes, equally well as the ability to view live sensor data in real time will permit y'all to keep a finger on the pulse of your automobile. Readouts available include RPM, engine temperature, bombardment voltage, fuel economy, and many more.*

*Readouts available are dependent on the twelvemonth/model motorcycle.

Monitor your ride

AutoTune

AutoTune is a powerful tool that allows you to tune your bike while you lot ride using data collected from the stock O2 sensors, for whatever air cleaner, exhaust, and camshaft combination you lot tin throw at it. But flash the cycle into AutoTune fashion, enjoy your ride, and flash the collected information dorsum into your ECM in one case yous're back dwelling house.

Vance & Hines Fuelpak FP3 for mobile phones

Vance & Hines Fuelpak FP3 Autotune

Frequently Asked Questions

How do I get the app?

Fuelpak FP3 is available in the App Store (iOS) or Google Play Store (Android)

What is the warranty on the Fuelpak FP3?

Vance & Hines offers an extensive one year warranty on the Fuelpak FP3.

How are your maps made?

All of our maps are fabricated on a dyno and verified on the road with the engine/piping combination listed. Every map goes through a full tuning process and is reviewed by calibration engineers.

How does the Fuelpak FP3 piece of work? What is the process?

1. CONNECT Plug the Fuelpak FP3 into your bike.
two. Tune Select the map for your setup.
3. RIDE Enjoy the improved operation and responsiveness of your motorcycle

I'm unable to flash a map using the FP3, what should I do?

First, verify that your FP3 app is upward to appointment through either the Apple tree App Shop or Google Play Store. Adjacent, connect to your bike and FP3. Verify that the firmware is up to appointment by going to 'Customer Back up' and pressing 'Bank check for Firmware Update'. Install firmware update if bachelor. If still unable to flash, go to 'Customer Support', 'Vance & Hines Back up', and printing 'Upload ECU Content', and so try flashing once again. Contact Vance & Hines customer support if the issue persists.

How exercise I autotune?

To Autotune your map, you must outset wink a base of operations map onto the wheel, the closest 5&H map to your configuration would be ideal. Then, select Autotune from the main menu and select 'Quick Setup'. Next, choose the map slot you would similar to base the Autotune off of. This volition initialize the Autotune process past flashing the bike. Now, become out and ride. The more varied types of riding you tin do (cease and go, steady state, uphill, downhill, low rpm, high rpm, depression and high throttle ranges, etc.) the better. We recommend 3 sessions, each approx. xxx-lx minutes in length. 'Apply' the data later on the 1st and 2d session, 'Finish' the Autotune afterwards the 3rd session. During Autotune you lot may feel bug such equally poor cold start, poor throttle response, and full general ride quality bug. These will resolve one time yous 'Stop' Autotune and the map is re-optimized.

How do I edit my map for camshafts and engine modifications?

Before making additional changes for camshaft(due south) and/or engine modifications, you must first flash a base map onto the bike. Then, go to 'View/Edit Maps' and select the map you want to edit. Under the 'Air and Fuel' section you lot will find 'Camshafts'. Under the 'General' section you will find other critical tables such as displacement, injector size, and rev limit. These tables can besides be constitute in the 'Map Optimization' menu from the 'Main Card'.

Does the Fuelpak FP3 ally to the motorcycle'south ECM?

Yes, once a Fuelpak FP3 has been used to flash a cycle information technology is permanently married to that ECM. Y'all can employ the same Fuelpak FP3 on other bikes to read/clear trouble codes and view live sensor data, but will not be able to wink a dissimilar wheel.

I'm getting a U0100 error code after flashing with the Fuelpak FP3, is this normal?

Yes, the U0100 problem code is a celebrated trouble code that occurs when flashing the ECM. Yous may take ane or several later on flashing, which is completely normal and volition not trigger a check engine light. You tin can periodically clear these codes out through the FP3 app if they occur.

Does the Fuelpak FP3 have to stay plugged into the motorcycle or can it be taken off?

The Fuelpak FP3 may exist removed from the motorcycle once the map has been flashed to the ECM. For Live Sensor Data and Diagnostic Code reading, or any other map editing or viewing, the Fuelpak FP3 must be plugged in, and your smartphone connected by Bluetooth.

huskeyraimmake.blogspot.com

Source: https://fuelpak.vanceandhines.com/

0 Response to "Can the Fuelpak 3 Read the Bcm Module"

ارسال یک نظر

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel